Difference between revisions of "Cone"

From Nevercenter 3D Modeling Wiki
Jump to: navigation, search
(New page: none ''Default Shortcut: None'' ''Menu Path: Create > Cone'' ==Description== The Cone command will create a cone shape at the center of the work grid, based...)
 
m (Protected "Cone" [edit=sysop:move=sysop])
 
(No difference)

Latest revision as of 00:52, 12 August 2008

Cone.jpg

Default Shortcut: None

Menu Path: Create > Cone

Description

The Cone command will create a cone shape at the center of the work grid, based on parameters specified in the options window.

Options

Top Radius

The radius (distance out from the y-axis on the xz-plane) of the top of the cone.

Bottom Radius

The radius (distance out from the y-axis on the xz-plane) of the bottom of the cone.

Height

The height (y-axis).

Sections

The number of sections around the outside of the shape (radial sections).

Height Sections

The number of vertical sections (along the y-axis).

Spokes

Toggle spokes on/off.

Notes

  • Editing values in the options dialog immediately after executing this command will allow you to see the effects in real time on the object.