Difference between revisions of "Character Modeling by Tony Jung Part 1"

From Nevercenter 3D Modeling Wiki
Jump to: navigation, search
Line 1: Line 1:
 
The first thing is of course to start with something. The typical choice is usually a box. Why a box? It is very simple to start with, you should always start with less and build up to your finally form, even when sketching, it is beneficial to start out with some basic shapes, like circles, square and so on to establish you figures gestures, posture, mood, action and so on.
 
The first thing is of course to start with something. The typical choice is usually a box. Why a box? It is very simple to start with, you should always start with less and build up to your finally form, even when sketching, it is beneficial to start out with some basic shapes, like circles, square and so on to establish you figures gestures, posture, mood, action and so on.
 
 
[[Image:Tony_jung_tutorial_1_001.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_001.jpg|thumbnail|none]]
  
  
 
Here I like to extrude up and back, keeping the shape relative the same between the extrude. By keeping them the same, I am establishing proportions. Generally, from the side of the head, from the bottom of the shin, to the eyes is your first box, from then the extruded face that went up is from the eye to the top of the head. Extruding back is from the start of the ear to the back of the head. If you look at the whole shape, from the side, it should look like a square with a bottom piece missing.
 
Here I like to extrude up and back, keeping the shape relative the same between the extrude. By keeping them the same, I am establishing proportions. Generally, from the side of the head, from the bottom of the shin, to the eyes is your first box, from then the extruded face that went up is from the eye to the top of the head. Extruding back is from the start of the ear to the back of the head. If you look at the whole shape, from the side, it should look like a square with a bottom piece missing.
 
 
[[Image:Tony_jung_tutorial_1_002.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_002.jpg|thumbnail|none]]
  
  
 
Here I scale out the model to a full head width, which is different than the head length that I was working with in pic 2. The head width will depend on what you are creating, but in my case the HW(head width) is about 2/3 of the HL(head length).
 
Here I scale out the model to a full head width, which is different than the head length that I was working with in pic 2. The head width will depend on what you are creating, but in my case the HW(head width) is about 2/3 of the HL(head length).
 
 
[[Image:Tony_jung_tutorial_1_003.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_003.jpg|thumbnail|none]]
  
  
 
Once my basic sets of proportion of the head is done, I start just shaping the head with some tweaking. I also deleted half the head and instance mirror to the other side.
 
Once my basic sets of proportion of the head is done, I start just shaping the head with some tweaking. I also deleted half the head and instance mirror to the other side.
 
 
[[Image:Tony_jung_tutorial_1_004.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_004.jpg|thumbnail|none]]
  
  
 
Here I select some edges at the bottom of the head to connect.
 
Here I select some edges at the bottom of the head to connect.
 
 
[[Image:Tony_jung_tutorial_1_006.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_006.jpg|thumbnail|none]]
  
  
 
Here I delete the inner faces, because at this point I don't need them while I form the shape of the head. The more unnecessary elements you end up working with will save you time and keep your modeling more effecient.
 
Here I delete the inner faces, because at this point I don't need them while I form the shape of the head. The more unnecessary elements you end up working with will save you time and keep your modeling more effecient.
 
 
[[Image:Tony_jung_tutorial_1_007.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_007.jpg|thumbnail|none]]
  
  
 
Here I cut 2 edges with the connect tool and I connect the newly created vertices to start establishing some topology. Now this is important, because the sooner you get to establishing your topology, edge loops the faster and you be to forming your shape. While it is still early, you won't have alot to clean up or rework to fix your topology later down the road.
 
Here I cut 2 edges with the connect tool and I connect the newly created vertices to start establishing some topology. Now this is important, because the sooner you get to establishing your topology, edge loops the faster and you be to forming your shape. While it is still early, you won't have alot to clean up or rework to fix your topology later down the road.
 
 
[[Image:Tony_jung_tutorial_1_008.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_008.jpg|thumbnail|none]]
  
  
 
Here I tweak the vertices to form the shape.
 
Here I tweak the vertices to form the shape.
 
 
[[Image:Tony_jung_tutorial_1_009.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_009.jpg|thumbnail|none]]
 
 
[[Image:Tony_jung_tutorial_1_010.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_010.jpg|thumbnail|none]]
  
  
 
I add an edge on one side of the model.
 
I add an edge on one side of the model.
 
 
[[Image:Tony_jung_tutorial_1_011.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_011.jpg|thumbnail|none]]
  
  
 
More tweaking.
 
More tweaking.
 
 
[[Image:Tony_jung_tutorial_1_012.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_012.jpg|thumbnail|none]]
  
  
 
Once again I am establishing some topology. Here i form the edge loops for the middle of the face, which incompass the eyes, the brows, cheeks and upper nose region.
 
Once again I am establishing some topology. Here i form the edge loops for the middle of the face, which incompass the eyes, the brows, cheeks and upper nose region.
 
 
[[Image:Tony_jung_tutorial_1_013.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_013.jpg|thumbnail|none]]
  
  
 
Here I bevel an edge that will be for the eye socket area.
 
Here I bevel an edge that will be for the eye socket area.
 
 
[[Image:Tony_jung_tutorial_1_014.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_014.jpg|thumbnail|none]]
  
  
 +
I delete the faces in the eye area and I tweak the surrounding shape.
 
[[Image:Tony_jung_tutorial_1_015.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_015.jpg|thumbnail|none]]
  
  
 +
Once again I am creating loops for my topology. This is goes from the middle of the mouth to the forehead.
 
[[Image:Tony_jung_tutorial_1_016.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_016.jpg|thumbnail|none]]
 
 
 
[[Image:Tony_jung_tutorial_1_017.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_017.jpg|thumbnail|none]]
  
  
 +
Again, I am connecting edges and creating edge loops for more estabilshing of the topology.
 
[[Image:Tony_jung_tutorial_1_018.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_018.jpg|thumbnail|none]]
 
 
 
[[Image:Tony_jung_tutorial_1_019.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_019.jpg|thumbnail|none]]
  
  
 +
Now these are just showing varying shots of the head as we are up to til now.
 
[[Image:Tony_jung_tutorial_1_020.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_020.jpg|thumbnail|none]]
 
 
 
[[Image:Tony_jung_tutorial_1_021.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_021.jpg|thumbnail|none]]
 
 
 
[[Image:Tony_jung_tutorial_1_022.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_022.jpg|thumbnail|none]]
 
 
 
[[Image:Tony_jung_tutorial_1_023.jpg|thumbnail|none]]
 
[[Image:Tony_jung_tutorial_1_023.jpg|thumbnail|none]]

Revision as of 17:58, 25 April 2008

The first thing is of course to start with something. The typical choice is usually a box. Why a box? It is very simple to start with, you should always start with less and build up to your finally form, even when sketching, it is beneficial to start out with some basic shapes, like circles, square and so on to establish you figures gestures, posture, mood, action and so on.

Tony jung tutorial 1 001.jpg


Here I like to extrude up and back, keeping the shape relative the same between the extrude. By keeping them the same, I am establishing proportions. Generally, from the side of the head, from the bottom of the shin, to the eyes is your first box, from then the extruded face that went up is from the eye to the top of the head. Extruding back is from the start of the ear to the back of the head. If you look at the whole shape, from the side, it should look like a square with a bottom piece missing.

Tony jung tutorial 1 002.jpg


Here I scale out the model to a full head width, which is different than the head length that I was working with in pic 2. The head width will depend on what you are creating, but in my case the HW(head width) is about 2/3 of the HL(head length).

Tony jung tutorial 1 003.jpg


Once my basic sets of proportion of the head is done, I start just shaping the head with some tweaking. I also deleted half the head and instance mirror to the other side.

Tony jung tutorial 1 004.jpg


Here I select some edges at the bottom of the head to connect.

Tony jung tutorial 1 006.jpg


Here I delete the inner faces, because at this point I don't need them while I form the shape of the head. The more unnecessary elements you end up working with will save you time and keep your modeling more effecient.

Tony jung tutorial 1 007.jpg


Here I cut 2 edges with the connect tool and I connect the newly created vertices to start establishing some topology. Now this is important, because the sooner you get to establishing your topology, edge loops the faster and you be to forming your shape. While it is still early, you won't have alot to clean up or rework to fix your topology later down the road.

Tony jung tutorial 1 008.jpg


Here I tweak the vertices to form the shape.

Tony jung tutorial 1 009.jpg
Tony jung tutorial 1 010.jpg


I add an edge on one side of the model.

Tony jung tutorial 1 011.jpg


More tweaking.

Tony jung tutorial 1 012.jpg


Once again I am establishing some topology. Here i form the edge loops for the middle of the face, which incompass the eyes, the brows, cheeks and upper nose region.

Tony jung tutorial 1 013.jpg


Here I bevel an edge that will be for the eye socket area.

Tony jung tutorial 1 014.jpg


I delete the faces in the eye area and I tweak the surrounding shape.

Tony jung tutorial 1 015.jpg


Once again I am creating loops for my topology. This is goes from the middle of the mouth to the forehead.

Tony jung tutorial 1 016.jpg
Tony jung tutorial 1 017.jpg


Again, I am connecting edges and creating edge loops for more estabilshing of the topology.

Tony jung tutorial 1 018.jpg
Tony jung tutorial 1 019.jpg


Now these are just showing varying shots of the head as we are up to til now.

Tony jung tutorial 1 020.jpg
Tony jung tutorial 1 021.jpg
Tony jung tutorial 1 022.jpg
Tony jung tutorial 1 023.jpg