Uncrease Edges

From Nevercenter 3D Modeling Wiki
Revision as of 01:01, 12 August 2008 by Presque (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Uncrease Edges.jpg

Default Shortcut: None

Menu Path: Subdivision > Uncrease Edges

Description

The Uncrease Edges command allows you to un-crease an edge which has previously been creased with the Crease Edges command. This command and the Crease Edges command only affect the inner mesh of subdivided shapes.

Notes